3 Tons Tilting Automatic Welding Positioner With Circular Working
Table by VFD Control speed
WP series welding positioner as a common positioner, widely usesd
in the boiler, construction , oil field etc. The workpiece may tilt
and rotation .
Welding positioner is mainly composed of a working table, turning
device, overturn device, electricity conducting device, standard
welding positioner is mainly composed of a working table, turning
device, overturn device, electricity conducting device, stander and
electric cabinet. The working table is driven by the turning device
which has many T style slots to ensure the work piece is strictly
fastened on the working table.
1. The turning device is made up of a motor, a speed reducer and a
swing set.
2. Frequency conversion and speed regulation is used for speed
change.
3. Stepless speed regulation, easy control and cheap maintenance.
4. The overturn device is mainly made up of an electric motor,
cycloidal gear speed reducer, worm wheel speed reducer,
semicircular gear.
5. Either end of the output shaft of the overturn device is
installed with a semicircular gear.
6. One end of the electric conduction device is connected to the
swing set while the other end has an electric conducting shaft. It
is directly propped to the working table, allowing the welding
current to be directly transmitted from the working table.
7. The stander is of a box structure, allowing high loading
capacity. It is made of Q235-A steel with annealing and finish
machining to eliminate the welding stress deformation.
Main Technical Parameters
| ype | Max Loading Kg | Table Diameter mm | Revolve speedrpm | Tilting Angle ° | Tilting Power KW | Revolving Power KW |
| TP05 | 50 | 300 | 0---3 | 0---90 | By hand | 0.12 |
| TP1 | 100 | 400 | 0---3 | 0---90 | By hand | 0.2 |
| TP3 | 300 | 600 | 0---2 | 0---90 | By hand | 0.37 |
| TP6 | 600 | 800 | 0---1 | 0---120 | 0.55 | 0.75 |
| TP12 | 1200 | 1000 | 0---1 | 0---120 | 1.1 | 1.1 |
| TP20 | 2000 | 1200 | 0---0.9 | 0---120 | 1.5 | 1.5 |
| TP30 | 3000 | 1400 | 0---0.8 | 0---120 | 2.2 | 1.5 |
| TP50 | 5000 | 1600 | 0---0.7 | 0---120 | 3 | 2.2 |
| TP100 | 10000 | 2000 | 0---0.6 | 0---120 | 7.5 | 4 |
| TP200 | 20000 | 2500 | 0---0.5 | 0---120 | 11 | 7.5 |
| TP300 | 30000 | 3000 | 0---0.4 | 0---120 | 18.5 | 11 |
| TP500 | 50000 | 3000 | 0---0.4 | 0---120 | 22 | 15 |
Remote control box line length:10m The speed adjustment way: frequency conversion |
Product Application:
With the working bench going up or going down, turning and
manipulating, the work piece stays in the best position for being
welded or assembled.
Product Advantage:
- Convenient, high efficiency
- high quality
- Reasonable price
- good service
Competitive Advantage:
- Electric control system composed of electric cabinet and manual
control panel making it easy to operate.
- Equipped with slewing bearing which helps increase the loading
capacity and makes the rotation smooth.
- Worktable is manufactured with six M30T bolt grooves used to clamp
and position the work pieces.
